Data transfer rate up to 10 Gbit/s
Degree of protection IP67
Cat 6A transmission protocol
Flexible assembly in the field

At top speed on the data highway

M12x1 Circular connectors x-coded

At top speed on the data highway

M12x1 Circular connectors x-coded

At top speed on the data highway

M12x1 Circular connectors x-coded

Series M12x1 Circular connectors x-coded

Future proof network infrastructure with data transmission up to 10 Gbit/s


  • You need connectors for an application that works with real-time data transmission?
  • You want to map the transmission path from a device installed in the field and the associated processing unit, completely with connectors from a single source
  • You need vibration-proof connectors with a data transmission rate of up to 10 Gbit/s
  • It is important for you that data is transmitted safely and quickly, even if the connectors are exposed to high torsional forces?
  • Manual assembly of printed circuit boards is too time-consuming and expensive
  • You need an X-coded SMT/THR socket connector that is also suitable for automatic assembly.
  • It is difficult to achieve the tolerance compensation between socket connector and PCB
  • You don’t know the exact cable length yet and want to install an X-coded flange flexibly in the field?

Connector field attachable with crimp termination

Build systems quickly, flexibly and reliably


CONEC_ID73675_VideoM12CrimpWeb80

… build systems quickly, flexibly and reliably

In industry and transport, M12 connectors are used for sensor / actor wiring as well as for BUS systems. Increasing time pressure due to short time-to-market requirements and high cost pressure make it necessary to build systems quickly, flexibly and reliably. During implementation, easy field attachable connectors play a crucial role.

The CONEC M12x1 connector with crimp termination can flexibly accommodate wire cross-sections from AWG28 to AWG22. The advantage of the turned crimp contacts is a reliable and gas-tight connection to the stranded wire, which ensures consistently low contact resistance even under extreme conditions.

The field attachable connector is tested according to railway approval DIN EN 45545-2:2016 R24
(flammability) and IEC 61373:2010-10 (shock/vibration).

Everything from a single source | from the device installed in the field to the associated processing unit

Overview CONEC Series X-coded

CharacteristicsM12x1 X-coding , 10 Gbit/s
StyleHousingsInsulation bodyConnectors
overmoulded
Sockets
overmoulded
Connectors
field attachable
Mounting styleFront panel moutingBack panel mountingHW
Shielding
Configurationaxialaxialangledaxialangledaxialangledaxialaxial
TerminationSMT/THRSMT/THRDip solderSMTTHRDip solderCrimp
Installation heigth [mm]9135,5610
Female Connector
Male Connector
CONEC_ID73676_Steckverbinder_konektionierbarWEb80

Connector field attachable X-coded

  • Crimp termination
  • CAT 6A/10 Gbit’s
  • Wire cross section 0.08 mm-0.34 mm²

Socket connectors

available as:

  • socket connector overmoulded
  • Socket connector angled, print termination 2-piece
  • Insulation bodies/housings SMT/THR
CONEC_ID73677_EinbauflanschvariantenWeb80

What speaks in favor of CONEC SMT/THR installation components?

With the SMT/THR variants, the user can mount the board equipped with the insulation body in different socket geometries. CONEC sockets are suitable for combined mounting and ideal for designs where the M12x1 thread of the housing is directly moulded on, thus creating maximum design flexibility.

The dual and symmetrical arrangement of the contact springs refines the previous shield concepts through an axial and radial connection to the socket side and is the result of the requirement of low-resistance shield transmission.

The special advantage of the CONEC SMT/THR variants for automatic placement


schirmkonzept-schirmanbindung-768x511-english

Due to the radial shield concept, a considerable tolerance range can be compensated during installation without negative effects on the contact resistances. Electromagnetic separation of the four wire pairs according to CAT 6A is nevertheless 100%.

Automatic assembly of the connector is possible despite the spring elements. The board assembler can rely on a suction system and use the adhesive pad applied by CONEC to grasp the connector for the assembly.

Advantages installation components SMT/THR

  • Time saving due automated assembly
  • Congenial to mount with differently flange geometries
  • Low forces on the board
  • Low contact shielding resistances
  • Big tolerance compensation between board and housing
  • Also mountable without CONEC-socket housings
  • Installation heights front panel mounting: 9, 13 mm
  • Installation heigths rear panel mounting: 6, 10 mm
X-codiert_SMT_THR_normal
Steckverbinder-umspritztWeb80

Connectors overmoulded X-coded

• axial & angled
• 4x2xAWG26
• also available as Patch cord M12 – RJ45

Your advantages at a glance


Advantages:

  • Robust design with the smallest possible
    installation space
  • High transmission rates up to 10 Gbit/s
  • No independent loosening of the screw
    connection due to self-locking
  • Flexible assembly in the field
  • Application-related, high-quality cable qualities
  • Full shielding against external influences
  • Standardised according to IEC 61076-2-111
  • RoHS compliant
  • Protection class IP67

Fields of application:

  • Automation technology
  • Railway technology
  • Building automation
  • Communication technology
  • Industrial interfaces
  • Security and monitoring systems
  • Transport industry

APPLICATION EXAMPLES:


Railroad technology:

Basic function: Reliable signal transmission
Function: vibration and torsion resistant
– Train door control

CONEC_ID73679_AdobeStock_333000513_Zugtüren_Web80
AdobeStock_379654325_EntertainmentZugSitzplatz

Entertainment System Airplane/Train

Basic function: Fast signal transmission
– Reliable Internet connection at the seat

Camera systems for machine vision

Basic function: High-quality data for accurate evaluations
Function: Vision and scanner systems for production monitoring and real-time data evaluation

AdobeStock_392632479_automatic vision sensor camera system

Not quite what you're looking for? Do you have a specific application case, require a special quality class or a different combination layout? Do you want to test the connectors?

We collect your data for the purpose of carrying out your contact request. The data processing is based on Article 6(1)(f) GDPR. Our legitimate interest is to respond to your inquiry. Data will not be shared with third parties. The data will be deleted once it is no longer necessary for the purpose of its processing. You have the right to object to the use of your data for the purpose of contacting you at any time.

Please fill in the fields completely so that we can process your inquiry optimally and as quickly as possible.


    captcha